Sorry there is no video in this post.
[Update - I've posted a video demonstrating many of the techniques I talk about in this post - to check it out, click here.]
(Subtitled – “Win the loudness war with our step-by-step and audio guide”)
Now immediately I should say – I love
MusicRadar. It’s a great site – I highly recommend it. Masses of news, posts, discussion and information for anyone interested in music and music technology. They were one of the first places to pick up and post about how bad
Death Magnetic sounded, and link back to my blog. As a result,
Wired magazine and the Guardian found the story and started writing about it, and the rest, as they say, is history. The bad press generated by Death Magnetic has done a fantastic job of raising awareness about this issue, and I for one am very happy about that.
So, MusicRadar rocks.
But that post is useless.
Sorry, but there it is. My reasons for saying so though, may not be what you’re expecting.
Here they are:
It doesn’t explain anything – All you get is a list of steps, with no reasons given, or discussion of what they are intended to achieve. Without the whys and wherefores, people will just cherry-pick suggestions and end up doing wrong or harmful things to music that didn’t need it
No concepts - I’m going to list some fundamental rules that will help you make any piece of music louder without killing the sound. None of them are mentioned in the MusicRadar post
Some horrible suggestions - The article refers to a “mild” 4:1 compression ratio – that’s the harshest setting I ever use !
The example song is almost useless for learning purposes. Anyone can crush and compress the life out of electronica – no-one has any idea what it’s “supposed” to sound like anyway. You can’t hear if you’re doing any damage to anything. How are you supposed to “win the loudness war” with a tutorial that deliberately tries to get “crunch from the upper mids and trash from the highest frequencies” ? Surely “winning” is getting a high level without making it sound terrible ?
It doesn’t even end up that loud - The dynamic range of the clip at the end of the tutorial is about 7 or 8 dBs. That’s loud – as loud as I ever happily make anything, but it’s hardly going to win any awards for loudness when Metallica and others crush their music down to only 2dB DR.
And sadly, it sounds bad, too. No impact in the kick or snare, distorted bass, two-dimensional sound and linear dynamics.
Now I’ll tell you what should have been in that post. It has some useful techniques hidden away in it, but how you’re supposed to figure out what they are, I have no idea…Here are some rules to help you make your music masters loud (if that’s what you want to do)
Make the mix loud
All too often loudness is treated as a mastering issue, but steps 1-10 of the MusicRadar post are actually about mixing – and that’s exactly the right way to do it, they just don’t spell it out clearly enough. There’s no point in recording everything as dynamically as possible, and then deciding to squash it to hell at the last minute.
Compress guitars, bass and vocals in the mix – guitars and bass at the amp itself, ideally. I don’t advise compressing to tape, though – with 24-bit audio it’s not necessary, and it’s too easy to overdo it.
Balance EQ
An unbalanced sound will never feel loud. This has happened to me on several occasions – I’m looking at the meters pegging, and listening and thinking “but it doesn’t sound loud”. Then I take a step back and realise there’s no bottom end in the mix. Whack in a low shelf EQ or broad parametric, and suddenly the room is heaving.
Coming at it from another angle, you can use our ears’ sensitivity in the 2kHz region to make guitars and drums sound aggressive and loud, without pushing up the average level too much. Don’t overdo it though, or it will sound harsh and thin. Whatever strategy you decide on, don’t overdo it. Balance is everything. (Here’s a post with more tips on using EQ.)
Take it easy with bass
Having made sure you have a balanced mix, be restrained with the bass. Bass is one of the first things to distort as the levels go up, which is why if you listen to most “ultra-loud”
CDs you’ll find they either have distorted bass, or are actually fairly bass-light. Again this is a technique the MusicRadar article uses, but doesn’t spell out.
Using a
low-cut filter to stop very low frequencies getting out of control is a good tip, too – but again, use with caution. Personally I love bass and prefer to sacrifice a little level for a nice big bottom end : )
Work to retain dynamics – by hand
This may seem paradoxical, but it’s absolutely key. As I’ve said before, without quiet, there can be no loud. Often when mixing, you work hard to get the balance between sections of songs to work dynamically – so the chorus kicks in when you want it to, for example. At the mastering stage though, this can be too much.
If you lift up the intro to a healthy level, by the time you get to the end all the processing will be flat out. If you get the end right, the intro may still be too quiet.So, either automate the compression to adjust to each section of the song, or do what I do and adjust the overall level of each section of the track going into the compression. If the chorus is compressing too much, reduce it’s level a little.
You’ll find there’s a balance point where it sounds just as loud, but the compressors aren’t flat out. Give the mix room to breathe, even if it sounds punishing most of the time – every time you ease back on the accelerator a little, the more scope you have to floor it 8 bars later.
Use multi-band compression
Once again, MusicRadar suggest this, but don’t explain why – and, I have issues with the settings they’re using. Multi-band compression is a great way to boost the average level of a mix, without introducing pumping (for example in the high frequencies when a kick drum is triggering gain reduction). It’s also a great way to completely mash a mix. Here are some multiband rules of thumb to avoid this:
Use the same ratio in all bands – different ratios can sound unnatural
Use similar amounts of gain reduction in all bands – this avoids changing the sound of the mix too much
Never push a band beyond the point where the gain reduction returns to zero several times per bar – it doesn’t achieve anything except unnatural, squashed sound, and the compression doesn’t work efficiently
Multiband compression is a complicated subject, and I get so many questions about it that I’ve released an
eBook and video about using it in mastering. To watch a free 50-minute webinar about multiband compression, click here.
(By the way, if you’re new to compression in general or would just like a refresher, this article may help you out: Using compression to add punch, warmth and power to your mix )
Use low ratios and avoid short attack times
This is a general rule for any kind of compression. Almost all of the time I use ratios between 1.5:1 and 4:1. Once the ratio gets much above 4:1, you are almost limiting anyway. Remember, the higher the ratio, the higher the threshold should be, to avoid over-compressing your mix.
Short attack times kill audio – I seldom use an attack time shorter than 20ms, except where I have a particularly “spiky” sound to deal with. (A very clicky bass drum, say) In mastering I often use attack times of 70ms or longer. We have limiters for controlling peaks and transients, why try to use a compressor to do this ? Check out the screenshot in the MusicRadar article – they have attack times of 2ms in every band ! No wonder the result sounds dull and lifeless.
(Note – All multiband compression is not created equal. I’m lucky enough to be able to use TC Electronics’ compression in their System 6000 processor. I can’t promise you’ll be able to get such good results with other multibands. If you’re interested though, I’ve written about the best multi-band compressor plugin I’ve found so far.)
So, there you go. Hopefully that gives you some extra understanding of what the MusicRadar post and example are doing, and where they’ve gone wrong. Listen to how much cleaner the version at Stage 12 sounds, for example.
I regularly use these techniques to master songs that are actually louder than the example I’ve been criticising, but sound better – hopefully you will be able to, too, if loudness is your goal. Just remember my catch-phrase:
Louder is better, but too loud is worse